ASROCK 870ICAFE R2.0 XFAST RAM DRIVER DETAILS:
|File Size:||8.4 MB|
|Supported systems:||Windows XP/Vista/7/8/10, MacOS 10/X|
|Price:||Free* (*Free Registration Required)|
ASROCK 870ICAFE R2.0 XFAST RAM DRIVER
Mobo asrock 870 icafe R2.0 jak-tim ( pulogadung )
Step Carefully place the CPU into the socket. Verify that the CPU is within the socket and properly mated to the orient keys. Step 3.
Close the socket: Flip the load plate onto the IHS. Press down the load lever, and secure ASRock 870iCafe R2.0 XFast RAM with the load plate tab under the retention tab. The protection cover will automatically come off by itself. Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat. Before you install the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation.
Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPUs.
Step 1. Apply thermal interface material onto the center of the IHS on the sockets surface.
Apply Thermal Interface Material Step 2. Place the heatsink onto the socket. Align fasteners with the motherboard throughholes. Step 4. Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners. Fan cables on side closest to MB header Fastener slots pointing straight out Press Down 4 Places If you press down the fasteners without rotating them clockwise, the heatsink cannot ASRock 870iCafe R2.0 XFast RAM secured on the motherboard. Step 5. Connect fan header with the CPU fan connector on the motherboard.
Motherboard ASRock iCafe R Drivers, utilities and instructions t
Step 6. Secure redundant ASRock 870iCafe R2.0 XFast RAM with tie-wrap to ensure the cable does not interfere with fan operation or contact other components. Please be noticed that this motherboard supports Combo Cooler Option C. For dual channel configuration, ASRock 870iCafe R2.0 XFast RAM always need to install identical the same brand, speed, size and chip-type DDR3 DIMM pair in the slots: If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots: It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips outward.
Step 2. PCIE slots: Installing an expansion card Step 1. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged.
Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the system unit cover if your motherboard is already installed in a chassis.
Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
Fasten the card to the chassis with screws. Dr. Debug, C.C.R. (Combo Cooler Retention Module); Supports ASRock XFast RAM, XFast LAN, XFast USB Technologies; Supports AXTU, iCafe R Not only can ASRock XFast RAM fully utilize wasted memory, it also offers many advanced functions.
With XFast RAM, ASRock Motherboard Series are tuned to deliver fantastic performance. AMDExtreme3 R · iCafe R
|Asus USB-AC54 USB Wireless adapter||Driver Quick Links|
|Asrock H77WS-DL 3TB+||Select ASRock Motherboard 870iCafe R2.0 driver for download|
|ZyXEL USG60W Security Gateway||To search drivers or utilities, select the motherboard model:|
|Acer TravelMate 5620 Touchpad||محصولات مرتبط بر اساس دسته بندی|